How To Make Your Racket Head Become Heavier?

Just now I had done a small operation to my racket..

I did the operation to make my racket head become more heavy..

Tools you got to prepare :

1) Cutter
2) PVC tape ( those electrician use to wrap the wire)
3) Long ruler
4) Your patient...(racket)

Ok...Let's begin the operation..

First
You got to cut a tape which is 38cm long..

Second
You cut the tape into 2 pieces with 9mm width..
The width is adjustable..The width is up to you one..
7mm,8mm,9mm,10mm also never mind..

Third
Now you can paste it on your racket..
You gonna start the operation from the 9/3 o'clock position of your racket frame..
You paste the tape along the side of your racket frame..

Forth
Then you got to press the tape..Ensure the tape is stick to the frame..
Now you can slowly press the tape..Make it stick with the inner part of frame..
(Repeat the same step on other side of your racket)

Fifth
After you paste the tape, now you can cut the "overlength" tape..
Try to make it start at 3 o'clock position and end at 9 o'clock position, vice versa.
Then your operation is done!!